Expert Answers about Toyota Truck Ramps
- Recommended Ramp For Loading Mower on 48 Inch Tall Flat Bed Truck
- Based on the height of your truck you will more than likely need a 12' ramp like the # GH54FR. You will need to make sure you not only have a safe angle for the ramp to load the mower but also enough clearance based on the angle where the ramp meets the truck bed. You will have to determine what is necessary based on the clearance of the mower you plan to load.
view full answer... - Recommended Ramps for Loading Lawn Mowers Into Truck Bed
- The Arched Loading Ramp Set part # EM07435 is what I recommend using for loading items into a truck bed. The ramps are lightweight at 20 lbs each and they fold for a compact storage. They also come with chains to help secure the ramps while loading. They will work with anything from big wheel ATV's to small wheel lawnmowers due to the close spacing of the horizontal supports.
view full answer... - Recommended Ramps For Loading 1690lb UTV In The Bed Of A Truck
- We have ramps that will work perfectly for loading your 1690lb UTV into the bed of your truck.
I recommend the Arched Loading Ramp Set # 288-07432-2 which is 90" long x 18" wide and has a combined weight capacity of 3000lbs. The included safety straps to keep the ramp tight against your tailgate is a great additional safety feature, and since the ramps fold in half storing them will take up half the space.
I included a picture of the Arched Loading Ramp Set # 288-07432-2 being used to...
view full answer... - Ramps For Loading Golf Cart Onto Truck
- From what I found it was about 36 inches from the ground to the top of the open tailgate on your F-250, so for a set of ramps to load your golf cart, a 90 inch arched ramp will be great:
- Erickson Arched, Aluminum Loading Ramp Set # EM07486
view full answer... - How Long of Ramps are Needed to Load Mower into Back of Truck
- Since mowers have limited ground clearance you need to go with about an 8 foot ramp to load into the back of a truck. For that you'd want something like the CargoSmart Ramp Set part # 3483018 which is 90 inches long.
view full answer... - Leveling Ramp Recommendation for F-350 with Truck Bed Camper
- The FloTool RhinoRamps Max Vehicle Ramp Set # FT11912MI is not designed for use as a leveling jack. It is only designed as a jack to raise both sides of a vehicle up evenly. Basically the manufacturer doesn't want you using these on uneven ground as the ramp was never tested in this setup. Their fear is that the ramp could lose traction or the tire slip off the ramp etc.
The part # UF48-979051 is a block setup that is designed for leveling which would be the best option we have.
view full answer... - Can I Use The Mad Ramps With A Lifted Truck?
- I've used these Mad-Ramps # MR54FR and they are super cool! The lift will not prevent you from using them, the angle of the ramps will just be a little steeper than usual. I recommend bringing out the ramps as far as they can go to help with the steeper angle. When I used them the truck was lifted about 2 inches, more like a leveling kit and it wasn't that steep so it'll be fine for you. If anything just be aware of where you're parking, If you can park on a hill to help counter the lift...
view full answer... - Trailer Ramp Springs Recommendation
- The heaviest set of springs that I have for ramp doors are the Conventional Ramp Door Spring for 8' Wide Enclosed Trailer part # CB250D96SHD which offers a 250 lb. capacity. This alone will likely not be enough for you.
If in your design you can incorporate something like the Ramp Spring 2K Torque for 1-1/2" Shaft part # RS16933RH for the right and part # RS16933LH for the left it could gie you the lifting support you will need.
If this is not a viable option using a winch mounted in...
view full answer... - Can Arched Loading Ramp # 288-07452 be Used for Loading into Truck Bed
- The Arched Loading Ramp # 288-07452 that you referenced can definitely be used for loading into a truck bed. Our review video only shows it used on a trailer but it was designed for a trailer or a truck so it would work well for your 2012 Toyota Tacoma. It is really lightweight too at 17 lbs for the set.
view full answer... - Recommendation on Loading Ramps to Help Load A Snow Blower into a Nissan Frontier
- You are correct that using a longer ramp will help you to load you snow blower into the rear of your Nissan Frontier. We offer a few different model ramps that come in different lengths. I recommend that you look at the ramps that are between 70 and 80 inches in length.
The Erickson Arched Loading Ramp Set , # EM07435, is a perfect option for you to use. These ramps measure 72 inches in length and are designed to fold for easy storage.
What I like about these ramps is the arch design...
view full answer... - Ramp Recommendation for Loading Golf Cart into Truck Bed
- For most golf carts you want to go with a 1,000 lb capacity loading ramp. I would however recommend the Erickson Arched Ramps part # EM07486 as they have a 3,000 lb capacity, an aluminum construction which will make them lightweight, and straps that attach the ramps to the truck.
view full answer... - Recommended Light Weight Loading Ramps to Load a Quad into a Truck Bed
- The loading ramps that I recommend for you to load the quad into your truck bed are the CargoSmart S-Curve Loading Ramp Set # 3483018.
The CargoSmart S-Curve Loading Ramp Set # 3483018 includes 2 ramps that are 90" long x 12" wide and a weight capacity of 1,500 lbs. So plenty for your smaller quad. But, these ramps also only weigh 16.5 lbs. each and fold for easier carrying. The light weight of these ramps will allow you to get the ramps in place and the quad loaded without injuring your back.
view full answer... - Snowmobile Kit for Mad-Ramps Pivoting Ramp System for ATV/UTV Ramps
- We do offer both the ramps and snowmobile kit you're inquiring about, the Mad-Ramps Pivoting Ramp System for ATV/UTV Ramps part # MR54FR and Snowmobile Ramp Kit part # MR69DR which is everything you need to load and secure a snowmobile in your truck bed.
view full answer... - Ramps to Load Golf Cart in Back of Truck
- To load your 1,000 lb golf cart in the back of your truck I recommend checking out the Arched Loading Ramp Set # 288-07452-2 which will work for you so long as the height from your tailgate to the ground is no more than 35". These ramps have a 750 lb capacity each for a total capacity of 1,500 lbs and you can position them to fit the width of your golf cart. I have added a photo a customer sent in showing how he used them on his truck.
view full answer... - Ramp that Can Help Get E-Bike into Truck Bed
- A motorcycle ramp like the part # 288-07452 would be a great option to help get the E-bike up into the truck bed so that you wouldn't have to lift the bike as high to get it onto the bike rack you have mounted to the crossbars.
view full answer... - Recommendation for a Straight Shank Trailer Hitch Mounted Cargo Carrier with a Ramp, Toyota Tundra
- We do have several hitch mounted cargo carriers that have a ramp, but the Curt 20x60 Folding, Aluminum Cargo Carrier, # C18100, does not come with a ramp. I have included a link to all of the hitch mounted cargo carriers we have that fit 2 inch trailer hitches and have a ramp.
view full answer... - What Car Loading Ramps Can I Use for Van Trailers 48 Inches High?
- For a ramp used to load vehicles, it is important to have a high maximum weight capacity. With that being said, I recommend the Gen-Y Hitch Aluminum Loading Ramp Set - 144" Long x 15" Wide - 8,000 lbs # 325-GH-R96. The Gen-Y Hitch Aluminum Ramp has a per-ramp weight capacity of 5,000 pounds (10,000 pounds total). As far as the 48-inch rise requirement, the Gen-Y is a great choice. I went ahead and attached a video that shows the ramp being used on the side of a trailer that is about 36...
view full answer... - Can the Dutton-Lainson Boat Trailer Deluxe Roller Bunks Be Used As Ramps
- The Dutton-Lainson Boat Trailer Deluxe Roller Bunk part # DL21741 has a 3,000 lb weight capacity. That said, this is assuming you have supports every few feet or so. I do see where others have used the rollers as ramps without these supports without issue (see photo) but I would have to advise that support legs be used when operated in this manner.
view full answer... - Solution for Transporting Tractors, Blowers, and Other Cargo on a Lifted Ford F-150
- While we do have a viable option for you, you are correct that your truck is too high to use the CargoSmart that the S-Curve Loading Ramp Set # 3483018. This is because this ramp has a maximum load height of 36" high.
With that being said, all of our ramps do not work with trucks that are higher than 36 inches. The only option is to use the Detail K2 Mighty Multi Utility Trailer - 6' Long # K2MMT4X6. This trailer measures 72" long x 48" wide x 7-1/2" tall and has a maximum payload capacity...
view full answer... - Recommended Ramps for Loading a Golf Cart on the Bed of 2020 Ram 1500
- Yes, I would recommend the 90x12 CargoSmart S-Curve Loading Ramp Set # 3483086-2 for loading a golf cart into the bed of your 2020 Ram 1500.
Loading up a golf cart in a truck bed is pretty standard so you won't have to worry about those cables snapping.
view full answer...
Go To Results